Search this Blog

Pageviews

Saturday, February 27, 2021

Korf Ceramic headshell

 



HS-A02 Ceramic Headshell
Measurably better
Built with rigidity in mind
Designed with attention to detail

HS-A02 Ceramic Headshell
The second generation of the
world's only fully ceramic headshell

HS-A02 Ceramic Headshell
"HS-A02 is simply the best headshell I have used. An 
essential audio component if you are serious"
— Jam Somasundram, Quadratic Audio
HS-A02 Ceramic Headshell
Measurably better
Built with rigidity in mind
Designed with attention to detail

HS-A02 Ceramic Headshell
The second generation of the
world's only fully ceramic headshell

 
 
HS-A02 offers an exceptional improvement in analogue reproduction quality through highest possible rigidity — more than twice of the next best headshell on the market.
Designed and built by Korf Audio to demonstrate what is possible when the classic analogue reproduction technology meets today's advanced design tools, materials and manufacturing techniques.
Aren't all headshells more or less same?
HS-A02 IS MEASURABLY BETTER
Korf Audio did a large-scale study of historic and currently available headshells using our unique set of vibration measurement techniques. You can follow the study and see its results at https://korfaudio.com/blog46

As a result of this study, we designed the HS-A02 with rigidity in mind, using advanced simulation and prototyping tools. It's more than twice as rigid as the next best headshellmeasured by Korf Audio. Higher stiffness directly translates into clearly audible sonic improvement.
UNIQUE ONE-PIECE CONSTRUCTION WITH REINFORCING RIB
The advances in ceramic production allowed us to integrate the connector and the headshell into one seamless casting. There's not a single point where the headshell is structurally weakened by a connection or use of lesser materials.

To further increase rigidity, we've created a rib supporting the 90 degree "bend" in the headshell. This rib decreases the effective length of the flat headshell part, and thus moves its resonance frequency up and the deflection down.

In all the other ceramic headshells, rigidity is compromised by the interface between the metal/polymer connector barrel and the ceramic part.
FULLY COMPATIBLE
Fits all the tonearms that accept the standard "SME/Ortofon/JIS" type straight headshells.

HS-A02 weighs 13 gram, including wires and fingerlift. If you are worried about the headshell mass and its impact on tracking, please use our Tonearm/Cartridge Matching Calculator. In general, most arm/cartridge combinations work fine with HS-A02. 

Note: there are some cartridges that need very light or highly resonant headshells to sound good. Such pickup cartridges would not benefit from using the HS-A02 headshell. To the best of our knowledge, these include JICO Seto Hori moving coil cartridge and all Grado MI cartridges
ATTENTION TO DETAIL
  • Better signal integrity through the use of pure silver litz wiring and custom gold-plated contact pins
  • More rigid connection to the tonearm thanks to the double locking pin. The clamping load is spread over the entire diameter of the barrel
  • Beautiful custom-made brass fingerlift, screws and knurled nuts are included
  • HS-A02 is supplied in foam-padded display packaging

Please note that due to the nature of the ceramic material, slight discolorations and minor shape irregularities are possible. They make each headshell unique and do not constitute a defect. 
Get yours today!
Available right now for € 199.- plus shipping 
at our partners The Supersense

No comments: